Machine to melt your wax in 4 litres and 10 litres
Optimise your productivity and profitability with a Terre de Bougies wax melter. This melter will allow you to melt your favourite waxes. Compared with a water bath machine, our appliance melts wax in half the time. This machine is equipped with a safety thermostat and a control light.
Good to know: This machine is incompatible with beeswax.
The instructions are available to download („Compliance“ tab).
Many advantages with this candle maker
- No water bath, rapid heating
- Small footprint
- Easy to transport with its handles and base
- Easy to open with its lid
Main features of the 10L melter
- Capacity: 11.3 L (Full)
- Actual capacity: 9.2 L (Up to recommended limit)
- Heat control with thermostat
- Power: 1800 watts
- Voltage: 220/240 volts
Dimensions of 10L model :
- Outside diameter: 27 cm
- External height: 39 cm
- Inside diameter: 25 cm
- Inside height: 24 cm
Main characteristics of the 4L fusion
- Real capacity: 4.4 L
- Heat control with thermostat
- Power: 1800 watts
- Voltage: 220/240 volts
- No risk of wax clogging at the tap (new)
Dimensions of the 4L model :
- Outside diameter: 21.5 cm
- External height: 36 cm
- Inner diameter: 19 cm
- Inner height: 17.5 cm
Important notes:
The thermometer probe is positioned at the bottom of the bucket, while the heating plate is placed inside with a separating layer between the two. As the probe is located in the bottom right-hand corner, a slight variation in temperature may occur during continuous heating.
Due to the limited heat diffusion of the wax, it is advisable to stir the preparation regularly during melting to ensure an even temperature.
Melting time varies according to the type of wax and the heat setting. Please heat over a low heat to improve the life of the machine. The tap does not have a heating system for the 10L.
The tap on the 4L machine has a new system that prevents blockages in the tap.
The instructions are available to download („legislation“ tab).
Warranty: this product is covered by the legal warranties provided by the regulations in force.
The warranty does not cover damage resulting from misuse, lack of maintenance, modification of the product or external causes.
