Solid soap base Melt and Pour – Crystal 3 Butters
The Melt and Pour Crystal 3 Butters base is an opaque white solid soap base, formulated from a blend of shea, cocoa and mango butters.
Important: this product is a raw material intended to serve as a base for solid soap making. It is not a finished cosmetic or a ready-to-use product: it must not be used as is at the time of purchase. Any transformation and final use is the responsibility of the customer, who must ensure compliance with the applicable regulations for finished cosmetic products.
Characteristics
- Appearance: opaque white solid at 25°C
- Natural origin content: 91.16% (ISO 16128-1:2016)
- Vitamins E, D and provitamin A from the butters
- Ethics: compliant with vegan and cruelty-free standards
Manufacturing process
- Cut: remove the base from the packaging and cut it into small pieces to facilitate even melting.
- Melt: heat the base in a double boiler at approximately 75°C. Stir gently to avoid boiling and ensure homogeneous melting.
- Mix: incorporate the additives required for your formulation, respecting the dosages you have previously validated through your own tests.
- Pour & harden: quickly pour the melted base into your container, spray rubbing alcohol to limit air bubbles, then let it cool and harden completely before unmolding.
Storage tips
To preserve the quality of the base, keep it at a temperature between 5 and 30°C. Refer to the safety data sheet (SDS) for the shelf life indicated by the manufacturer.
Safety and stability
Before any marketing of your creations, it is your responsibility to carry out stability and microbiological safety tests on the finished product you formulate from this base, particularly after adding additives. The manufacturer indicates that the base complies with European requirements to serve as an ingredient in the manufacture of finished cosmetic products; it is up to the person placing the finished product on the market to ensure its regulatory compliance.
